Jack Wolfskin Exolight II steel blue

The Exolight trekking tent from Jack Wolfskin is ultra-light, very stable in the wind and quick to pitch. Its outer tent is coated inside with PU and outside with silicone. This makes it very tear and tension resistant. The boom system was designed with the specialists at DAC and can withstand wind speeds of up to 80 km/h. It can be quickly and easily attached to the boom by means of a clip fixation. Inner and outer tent are connected so that the inner tent always remains dry when its erected. A ceiling compartment, mosquito nets and integrated ventilation are further details.

Siliconised HT NYLON RIPSTOP 20D (1500 mm, 100 % polyamide)
The 20D High Tenacity Nylon Ripstop fabric developed for ultra-lightweight construction is coated on the outside with silicone and on the inside with PU. This results in a 46g/m² ultra-light seam tape sealed outer tent material with balanced properties from the advantages of both coating types.

MOSKITOMESH 15D (100 % polyester)
The fine, close-meshed mosquito net is light, non-slip and very stable. It provides a well ventilated interior and keeps even notorious mosquitoes (NO-SEE-UMs) out. The lighter 15D or 20D variants are used for silicone lightweight tents.

Hydrofilm Siliconised Nylon 40D (5000 mm, 100 % polyamide)
The 40D nylon ripstop fabric developed for ultra-lightweight construction is coated on the outside with silicone and on the inside with PU. This results in a 71 g/m² ultra-light seam tape-sealed tent floor material with balanced properties from the advantages of both coating types.

DAC FEATHERLITE NSL
The well-balanced DAC aluminium lightweight frame combines maximum strength with minimum weight. In order to positively influence stability and bending properties, two different, specially matched diameters are joined together seamlessly. The particularly light plug connections are protected by additional inserts and thus achieve enormous stability.